PPG Semco
®
Packaging and Application Systems
www.semcopackaging.com
Email: semcoinfo@ppg.com
For the Application Support Center nearest you, please visit our website at www.semcopackaging.com
Semco and Semkit are trademarks of PRC-DeSoto International.
All recommendations, statements, and technical data contained herein are based on test we believe to be reliable
and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a
warranty, either expressed or implied. User shall rely on his own information and tests to determine suitability of the
product for the intended use and assumes all risks and liability resulting from his use of the product. Seller’s and
manufacturer’s sole responsibility shall be to replace that portion of the product of this manufacturer which proves
to be defective. Neither seller nor manufacturer shall be liable to the buyer or any third person for injury, loss, or
damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements
other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding upon
the manufacturer or seller.
This document has been reviewed by the PPG’s Aerospace Export Control Department and has been determined
to contain only EAR99 controlled data.
PRC-DeSoto International, Inc.
To Previous Page
Loading...
