w ww.practixx .com
38
|
GB
Article number(s) for wear parts:
Item 7 Blade 7913001601
Item 8 Screws 3913001001
Item 11 Boundary wire 7913001702
Item 12 Wire pegs 7913001701
Spare parts and accessories can be obtained from
our Service Centre. To do this, scan the QR code on
the front page.
14. Disposal and recycling
Notes for packaging
The packaging materials are recycla-
ble. Please dispose of packaging in
an environmentally friendly manner.
Notes on the electrical and electronic equipment
act [ElektroG]
Electrical and electronic appliances do not
belong in household waste, but should be
collected and disposed of separately.
• Used batteries or rechargeable batteries that are
not installed permanently in the old appliance must
be removed non-destructively before disposal.
Their disposal is regulated by the battery act.
• Owners or users of electrical and electronic devic-
es are legally obliged to return them after use.
• The end user is responsible for deleting their per-
sonal data from the old device being disposed of!
• The symbol of the crossed-out dustbin means that
waste electrical and electronic equipment must not
be disposed of with household waste.
• Waste electrical and electronic equipment can be
handed in free of charge at the following places:
- Public disposal or collection points (e.g. munici-
pal works yards).
- Points of sale of electrical appliances (stationary
and online), provided that dealers are obliged to
take them back or oer to do so voluntarily.
- Up to three waste electrical devices per type of
device, with an edge length of no more than 25
centimetres, can be returned free of charge to
the manufacturer without prior purchase of a new
device from the manufacturer or taken to another
authorised collection point in your vicinity.
- For additional take-back conditions of the man-
ufacturers and distributors, please contact the
respective customer service.
• In the case of delivery of a new electrical device by
the manufacturer to a private household, the latter
may arrange for the free collection of the old elec-
trical device upon request from the end-user. Get in
contact with the manufacturer’s customer service.
• Remove the battery cover screws and remove the
battery cover (Fig. 27/28).
• Remove the battery retaining device.
• Pull the battery out carefully.
m NOTE Do not pull on the cables.
• Loosen the locking and pull the connector o.
• Insert the battery (if necessary a new original bat-
tery).
• Re-install the battery in reverse order (Fig. 27/28).
13.3 Software update (Fig. 29)
m NOTE The robot must be connected to the
WiFi in order to perform an automatic software
update via the app.
Connect your robot to your WiFi.
The software can be updated as soon as a new ver-
sion is available. (The latest software version can be
found on our homepage.)
The software can be installed via USB or the app.
The software for USB transmission can be download-
ed from our homepage www.scheppach.com.
13.3.1 Software update via USB
• Look for the latest software version on our home-
page.
• Download this to an empty FAT32 formatted disk.
• Remove the battery covering as described in 13.2.
• Insert the data carrier into the USB drive (Fig. 29).
• Switch on the mower by pressing the -button
“POWER ON/OFF” button).
• The update starts automatically.
• Wait until “OK” appears on the display and then re-
move the data carrier.
• As described in point 13.2. replace the battery cov-
er.
m NOTE:
The operating manual supplied with your robotic
lawnmower (1) is based on the software version at
the time of production of the mower.
Some new or changed features and functions may
not be included in the operating manual.
You can nd the latest version of the software in the
app or at www.scheppach.com.
Service information
With this product, it is necessary to note that the fol-
lowing parts are subject to natural or usage-related
wear, or that the following parts are required as con-
sumables.
Wearing parts*: Blade (7), screws (8), boundary wire
(11), wire pegs (12).
* may not be included in the scope of delivery!
To Next Page
Loading...