■ 5 Operation
44
• Printing the application settings
– Keep «PRINT» pressed until "PRINT APPLICATIONS" is displayed.
– Release «PRINT».
– The application settings and all the settings for the methods
currently saved are printed.
Interface :
Baudrate : 9600
Parity : 7-even-1stop
Handshake : Hardware
Interface settings
Data-protection : off
Theft-protection : off
Security settings
Key tone: on
Key settings
Applications :
--------------
Printout of the application settings and
methods.
Dryer setup :
Heat mode : Standard
Temperature : 105 C
Timer stop : off
Time : 10.0 min
Auto stop : 2/20 D/s
Free : 1/20 D/s
Autostart : off
Standby Temp : off
Temperature : 40 C
Unit : 100-0%
Current drying parameter settings
Targe weight :
Weight check : off
Nominal : 5.000 g
Upper limit : 6.000 g
Lower limit : 4.000 g
Current starting weight settings
Method : TEST Soft
Dryer setup :
Heat mode : Soft
Temperature : 100 C
Timer stop : on
Time : 25.0 min
Auto stop : off
Free : 1/20 D/s
Autostart : off
Standby Temp : on
Temperature : 40 C
Unit : 100-0%
Weight check : off
Nominal : 6.000 g
Upper limit : 7.000 g
Lower limit : 5.500 g
Settings for the first method
Ash residue:
Mode : manuel
memory choice : on
Settings for the ash residue (only XM 66)
To Next Page
Loading...
