Precisa XM 60 - Sample Preparation

■ 5 Operation
46
• Reset Statistics (only XM 60, XM 60-HR)
– Keep «START/STOP» pressed until "RESET STATISTICS" is dis-
played.
– Release «START/STOP»
• Ash residue
– Ensure that there is no drying taking place, i.e. that the instrument
is in weighing mode.
– Keep «START/STOP» pressed until "ASH RESIDUE" is displayed
– Release «START/STOP».
– The program ash residue is started (see chapter 7 "Ash residue
program").