Precor 515e - Configuring MPH or KPH for Speed Measurement; Changing the Batteries; Getting Service

Configuring MPH or KPH for Speed Measurement
The 515e ski machine lets you specify how you want speed and distance
measured, whether with MPH and miles or KPH and kilometers.
To change the current setting, take the following steps:
1 Press the PACER and START/STOP keys simultaneously and hold for four
seconds. The entire display lights up momentarily, the console beeps
twice, and “002” appears on the display.
2. Press the MODE key until 460 appears on the display.
Note: You can scroll through ail the numerical displays by simply pressing
the MODE key repeatedly until the desired number appears. Pressing
START/STOP also backs up the display one option.
3. Press PACER to move between the two settings: miles and MPH or
kilometers and KPH.
4. When the desired setting appears on the display, press RESET to activate
the ski machine.
The ski machine is now ready to use.
Changing the Batteries
Your ski machine is shipped with two “AA” alkaline batteries installed in the
electronic console. When your electronic console no longer shows a digital
readout or the count becomes erratic, you need to change the batteries.
To change the batteries, take the following steps:
1. Open the door on the side of the electronic console, discard the old
batteries, and replace the old batteries with two new “AA" alkaline
batteries. The entire display lights up momentarily, the console beeps
twice, and "002” appears on the display.
2. Press the MODE key until 460 appears on the display.
Note: You can scroll through all the numerical displays by simply pressing
the MODE key repeatedly until the desired number appears. Pressing
START/STOP also backs up the display one option.
3. Press PACER to move between the two settings: miles and MPH or
kilometers and KPH.
4. When the desired setting appears on the display, press RESET to activate
the ski machine.
The ski machine is now ready to use.
Getting Service
Do not attempt to service the 515e ski machine yourself except for the
maintenance tasks as described in this manual.
For further information about product operation or service, contact an autho¬
rized Precor dealer (or a Precor Factory Authorized Service Company). To locate
the Precor dealer nearest you, call 1-800-4-PRECOR.