9.21, 9.21i, 9.21S, 9.21Si Treadmill
Page 11
Procedure 2.5 - Selecting U.S. Standard or Metric Units (prior
to July 21, 1997)
Selecting United States standard units causes information to be displayed in feet, miles and
pounds. Information is displayed in meters, kilometers and kilograms if metric units are selected.
After you have selected a measurement standard, the software compiles and records workout
information in the units of the measurement standard selected. Changing to the alternate
measurement standard after your workout has started will cause invalid data to be displayed. For
this reason, change the measurement standard only after turning ON the treadmill.
Procedure
1. Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.
2. With the Enter Your Weight banner scrolling, press and hold the SPEED ▲ and QUICK
START keys simultaneously until the Press ▲ for MPH or ▼ for KPH message scrolls
across the screen.
3. Use the SPEED ▲ or SPEED ▼ key to select the measurement standard.
To Next Page
Loading...
