Owner’s Manual: Treadmill Safety Features 7
Turning the Unit ON and OFF
To turn the unit ON and OFF, use the I/O power switch
located at the front of the unit, near the power cord. Refer
to Diagram 4.
Important: When it is not being used, turn the unit OFF.
Diagram 4: I/O power switch
Using the Reset Switch
The treadmill is designed to automatically turn off if its
electronic boards overheat. A red button near the power
switch resets the unit after the thermal circuit breaker trips.
Do not press this button indiscriminately. Excessive heat
can damage the electronic boards on the treadmill.
To help eliminate overheating, locate your treadmill away
from heating ducts. For more information, refer to
Advanced Programming and Troubleshooting.
UGuide_A4.book Page 7 Wednesday, February 27, 2008 3:36 PM
To Next Page
Loading...
Need help?
General
