Precor 9.23 Service Manual

9.23, 9.27 Treadmill
20081-118 Page 7
Display Test
10. The display test will light every segment in the display. You must watch the display
throughout the test to ensure that every display segment is functioning. This test will run
continuously until you press the STOP key to halt the display test.
Console Sel
11. The display will indicate whether the console is set as a 9.23 or 9.27 treadmill/ The  will
toggle the setting. Press the ENTER key to save the setting that agrees with the treadmill’s
model number.

Precor 9.23 Specifications

General

Incline Range	0% to 15%
Decline	Not available
Motor	3.0 HP
Speed Range	0.5 to 12 mph
Heart Rate Monitoring	Touch sensor
Weight Capacity	350 lbs
Dimensions	54" H
Display	LCD display with feedback