Experience Strength™ C-Line Owner’s Manual: Daily Inspection
9
Figure 3: Cable bolt must have a minimum of ten threads into the selector
stem
Check Warning and Instructional Labels
Inspect warning and instructional labels daily to make sure that all the
information can be clearly read. If any portion is not visible or part of the
label is not adhered properly, replace that label immediately (refer to
Obtaining Service
for purchase information).
Clean labels as needed with a mild soap and water solution in a spray bottle,
and dry thoroughly with a soft cloth.
The following figure shows an example of a user instructional label.
Figure 4: Sample user instructional label for the Experience Strength C-Line
To Next Page
Loading...
Need help?
General
