C954, C956 Treadmill
Page 1-8 Page 8
12. When the QUICK START key is held for 2 seconds the message HOLD TO CLEAR
ERRORS will be displayed. If the QUICK START key is held for an additional 2 seconds, the
message CLEARED will be displayed. When the QUICK START key is released the
message NO MORE ERRORS will be displayed and all error are erased from the log.
13. Press the STOP or the ENTER key to proceed to the serial number (version 3, only).
Version 1 & 2 units will skip to step 15.
14. The units serial number will be displayed.
15. Press the RESET, STOP or the ENTER key to exit the information display.
To Next Page
Loading...
