C960 Series Commercial Treadmill
Page 16
Procedure 2.4 - Displaying the Odometer
Note:
Some older versions of software display the odometer as part of the diagnostics program. Refer
to procedure 2.1 for these units.
1. To access the odometer press the RESET key to return to the start up point, if necessary.
Press keys Speed
S and Incline S, simultaneously or keys RESET,6,5 sequentially. The
odometer will displayed in either miles or kilometers depending on club setting selection.
Refer to procedure 2.3.
2. Press the Enter key. The hours in use will be displayed.
3. Press the Enter key. The software version will be displayed.
4. Press the Enter key to exit.
To Next Page
Loading...
Need help?
General
