C960 Series Commercial Treadmill
Page 2
Section One - Things you Should Know
About This Appendix
Section One, Things You Should Know. This section includes technical specifications and a
procedure matrix. Read this section, as well as the owner's manuals shipped with the C960,
C962 and C964 Treadmills, before you perform the procedures in this manual.
Section Two, Software Features. Precors C960 Series Treadmills are programmed with
several diagnostic and setup features. This section contains the procedures you need to access
the diagnostic features on this treadmill.
Section Three, Checking Treadmill Operation. This section provides you with a quick way of
checking treadmill operation. Check treadmill operation at the end of a maintenance procedure
and when it is necessary to ensure that the treadmill is operating properly.
Section Four, Inspection and Adjustment Procedures. Perform inspection procedures when
a trouble symptom points to a problem and after replacing major components. Many
maintenance problems can be fixed by adjusting various treadmill components. This section also
provides the step-by-step procedures required to make these adjustments.
Section Five, Troubleshooting Procedures. Diagnostic and troubleshooting procedures are
performed when it is necessary to isolate a problem to a particular component.
Section Six, Replacement Procedures. When a component must be replaced, follow the step-
by-step procedures included in this section.
Section Seven, Technical Diagrams and Parts Lists. This section includes wiring diagrams
and block diagrams for the C960, C962 and C964 Treadmills.
General Information
For the latest exploded view, part number and part pricing information, visit the Precor dealer
website at “www.precor.com/Dealer.
To Next Page
Loading...
Need help?
General
