C960 Series Commercial Treadmill
Page 7
THEN... OTHERWISE...
Press any
T key, then continue Press any S key, then skip to Step 6.
with the next step.
Diagram 2.1 - C964 Electronic Display
5. With the message PRESS ENTER WHEN FINISHED displayed on the electronic console,
press the INCLINE
S and INCLINE T keys to adjust the slant of the running bed. Press
ENTER when you are finished.
6. The LIMIT SWITCH [YES/DN NO/UP] prompt is displayed. If you wish to check the limit
switches...
THEN... OTHERWISE...
Press any T key, then continue Press any S key, then skip to Step 9.
with the next step.
7. Watch the electronic console. If the three limit switches are adjusted correctly, the following
series of messages is displayed on the electronic console:
GOING TO FIFTEEN PERCENT
AT FIFTEEN PERCENT
GOING TO UPPER LIMIT
GOING TO NEG THREE PERCENT
AT NEGATIVE THREE PERCENT
GOING TO LOWER LIMIT
GOING TO ZERO
To Next Page
Loading...
Need help?
General
