page 32
COMMERCIAL PRODUCTS DIVISION
The QUICKSTART key can be pressed any time during the Setup prompts.
Default values apply after that point. See the table below:
Press QUICKSTART at the,... The following occurs:
Precor banner You bypass the Setup prompts. A message
appears,
Belt Starting 3, 2, 1,...
and your work out
begins in Manual mode.
Program prompt The displayed program is accessed.
Note: If you press QUICKSTART after selecting
the Distance Goal or Calorie Goal programs, the
default values are:
Distance Goal: 3 miles (5 kilometers) Calorie
Goal: 300
Workout Time prompt The time that appears on the display
becomes the workout time limit.
Distance Goal prompt The displayed number is set as a distance goal.
This prompt only appears when the Distance Goal
program is selected. Allowable distance entries:
0.1 to 50.0 in miles (or kilometers).
Calorie Goal prompt The displayed number is entered as the calories
goal. This prompt only appears when the Calorie
Goal program is selected. Enter a value between
1 to 5000 calories.
Weight prompt The weight that appears on the display becomes
your designated weight that the treadmill uses to
compute statistics. Acceptable entries: between 0
and 999.
Age prompt The age that appears on the display
becomes your designated age that the treadmill
uses to compute statistics. A correct age entry
between 0 and 99 is very important if you plan
to utilize the heart rate characteristics of the
treadmill. The QUICKSTART key acts the same
as the ENTER key at this point because you
have answered all the Setup prompts.
ENTER: Workout specific prompts need to be answered and “entered” into memory.
Pressing ENTER selects the information displayed and processes it.
To Next Page
Loading...
Need help?
Power and Motor
Performance
Weight and Dimensions
