page 41
COMMERCIAL PRODUCTS DIVISION
CUSTOM PROGRAMS
Two custom programs exist on the C996i. The second custom program is
available only if the Fitness Test is disabled. The incline on these programs can
be preset by the club. Refer to
Club Information
on page 21.
FITNESS TEST
The Fitness Test (program number 16) provides a means of comparing your fitness
level with official fitness test of the International Association of Firefighters (IAFF).
The C996i Fitness Test is written using the Gerkin Protocol which is the basis for
the official IAFF fitness test and part of their Wellness and Fitness Initiative.
Important: You must enter your age during the Setup prompts and wear a POLAR
®
chest strap or grasp the touch-sensitive portion of the handrail throughout the test.
Note: The Fitness Test is “enabled” at the factory (program number 16), however the
club can remove it from the choice of programs on the C996i. If Custom Program 2
appears as program number 16, the Fitness Test has been disabled by the club and
is no longer available to the user. Ask the club owner or manager for assistance.
FITNESS TEST GUIDELINES
Before selecting the Fitness Test, read the following guidelines:
• You must enter your age at the AGE setup prompt.
• You must wear the POLAR
®
chest strap or grasp the touch-sensitive portion of
the handrail throughout the test.
• Let the test adjust the running belt’s speed and incline for you. The keyboard
keys are disabled during the test. However, if you need to stop the running
belt to regain control or reduce your heart rate, press the STOP button.
• When you finish the Fitness Test, the running belt’s speed slows to 3 mph
(5 kph) and the incline returns to zero. A one-minute cool-down period is
appended to the test. After which, you can press QUICKSTART to enter the
Manual program and continue cooling down. Press the SPEED ▼▲ keys to
regulate the running belt and return your heart rate to a normal, restful state.
To use the Fitness Test follow the steps found in
Quick Steps to Working Out
(page
34) and choose the appropriate program number at the program prompt. Follow the
remaining Setup prompts to enter your AGE. Once you have finished answering
the Setup prompts, the following occurs:
• The software verifies that it detects a heart rate signal. You need to press the
SPEED ▲ key to begin your workout.
Note: If your heart rate cannot be detected (or transmitted through the
POLAR
®
chest strap or touch-sensitive grips ), the letters “HR” blink in the
heart rate display. Once a heart rate is detected the number that corresponds
to your heart rate appears.
To Next Page
Loading...
Need help?
Power and Motor
Performance
Weight and Dimensions
