Assembling the Climber 29
7. Position the water bottle holder as shown and attach it to
the right handrail. Secure the holder using three Phillips-
head screws and a Phillips screwdriver.
Figure 11: Attaching the bottle holder
8. Clean the foot steps, plastic covers and upright support
with a soft cloth or wipe moistened with an appropriate
cleaning solution. For more information about which
cleaners to use, refer to Daily Cleaning.
9. Level the climber as described in the section Making Sure
the Unit Is Stable.
Important: Do not allow anyone to use the climber until it has
been leveled and made stable.
To Next Page
Loading...
