Owner’s Manual: Display Console 17
Keypad
Use the keypad to enter your workout session selections.
RESET: During pause mode, press the RESET key to
display a WORKOUT SUMMARY. Press RESET again
to return to the Precor banner. No workout statistics are
saved.
QUICKSTART: Press QUICKSTART to bypass the
setup prompts and start your workout immediately
using the Manual program. Refer to Choosing
QUICKSTART.
SELECT: The SELECT key has two functions:
• To select a program
• To change features displayed during a workout; refer
to Changing the Display Features Using the
SELECT Key
RESISTANCE ▼▲: Press and hold the RESISTANCE
arrow keys to increase or decrease the force applied
against your stride from 1 to 20.
When changes occur, the resistance you feel through
the foot pedals is not immediate.
Note: During your workout, to view the current
resistance, tap either RESISTANCE ▼ or ▲ key. To
change the resistance, press the arrow key for more
than one second.
EFX5.17i and EFX5.21i
EFX5.19
To Next Page
Loading...
