page 27
COMMERCIAL PRODUCTS DIVISION
In a course, This is what happens...,
you press Reset Enter the Workout Summary mode. When you complete the
cool-down period (or exit from a paused mode by pressing
Reset), the Workout Summary banner appears. Workout statis-
tics except TIME, STRIDES and CALORIES reset to zero. (Note
that the TIME display shows the accumulated workout time in-
cluding the cool-down period.) To exit before the time limit
elapses, press Reset.
In Pause
mode, you This is what happens...,
resume pedaling Returns to the course and the workout statistics continue from
where you left off.
press Reset Displays the Workout Summary banner.
exceed time limit The EFX exits Pause mode and resets the displays.
Note: The club has the option to change the duration of the Pause mode. A duration
can be set between 1 and 120 seconds and limits how long a user can pause his or
her workout. Refer to
Club Information
on page 15.
In Cool down,
mode This is what happens...,
slow pedaling
or no pedaling
is detected. Enter Cool-down, Pause mode. Time stops accruing and
PEDAL FASTER appears on the display. Note that the Pause
mode has a time limit and the club has the option to deter-
mine the setting.
you press Reset Displays the Workout Summary banner. See the information
at the top of this page.
it ends. Displays the Workout Summary banner. See the information
at the top of this page.
At the
Workout Summary
banner, you This is what happens,...
press Reset The display returns to the Precor banner and workout statistics
are reset to zero.
To Next Page
Loading...
