User ID Entry with CSAFE Equipment
This equipment is fully compatible with CSAFE protocols. When the equipment is connected to a CSAFE master device, the user is
prompted to press ENTER
and begin an identification process. The user ID is displayed as five zeros and indicates the starting point.
The following table describes key functions while in CSAFE mode.
CSAFE access keys
Keys Function
Number Keypad
Use the number keys to enter a user ID. Once you have entered the user ID number, press OK
to submit
the user ID.
CLEAR Erases individual numbers in the user ID from right to left.
OK Submit the user ID.
Note User ID entry is bypassed when the user enters five zeros. No workout statistics are recorded.
PAUSE Resets to the Welcome banner.
A message appears on the display and indicates when the user ID is accepted by the CSAFE master device. Once program selection is
complete, the user can begin exercising.
To Next Page
Loading...
Need help?
General
