Informational Settings
Information Display settings provide access to an error log, software and equipment serial numbers, and usage information.
To view the Informational settings:
1. Press Pause.
2. Enter the password:
.
3. Press Enter. The settings appear.
4. Scroll through the informational settings.
Informational Displays values
Product Value Information provided
All ODOMETER The odometer value correlates to equipment and standard of units selected in a
program.
• TRM / AMT: Cumulative units logged to date. AMT also displays vertical
strides.
• EFX: Strides logged to date.
• Bike: Revolutions logged to date.
• Climber: Floors climbed.
AMT BELT USAGE
• Belt Stride Count: Tracks the number of strides on equipment.
• Stride Count Reset: Reset increases by one with each reset.
• Odometer at Last Reset: Reading at belt change. The odometer continues
to count forward after the belt change.
All HOUR METER
• Number of hours that the equipment has been in use.
• Tracks elapsed minutes, but value is truncated to nearest full hour.
TRM BELT RATING Number from 0 through 10, indicating the condition of the treadmill belt. If the
current rating is 0 or 1, the belt needs to be replaced.
Note
If you have just replaced the treadmill belt, press and hold the Quick Start
key while the Belt Rating is visible to reset the Belt Rating to 10.
TRM, EFX MAINTENANCE COUNTER Keeps track of strides or miles so that the Active Status Light can alert need for
maintenance.
All UPPER BOOT SW PART NUMBER Upper board application software part number and version
All UPPER BASE SW PART NUMBER Upper base application software version
All LOWER BASE SW PART NUMBER Lower application software version
All METRICS BOARD Software number on the Metrics Board
AMT STRIDE DIAL SW PART NUMBER Stride Dial software number
All SERIAL NUMBER Used to determine exact model and type of equipment
All USAGE LOG
• The number of times each program has been used and displays the
associated cumulative minutes.
• Helpful in determining user preferences in program selection.
All ERROR LOG Displays error codes detected by software. For more information, refer to Error
Log.