P31 CONSOLE
GETTING STARTED GUIDE
System Settings
Use the System Settings mode to congur
e settings in ways that benet your exercisers and your facility. For detailed information on
system settings, view the Operator's Guide on the product page at www.precor.com.
NOTE
The information provided in this section is intended for system administrators and Precor service technicians. DO NOT share it
with exercisers or non-administrative staff.
To view the Club Parameters settings:
1. At the Welcome banner, press Pause.
2. To enter the password, press the following numbers in sequence: 5 6 5 1 5 6 5
3. Scroll through the club parameters using the following key:
Navigational Key
Key Function
Navigate the System Settings menu
OK Select a setting
BACK Return to previous menu level without saving changes
PAUSE Exit the System Settings mode and returns to the Welcome banner
Informational Settings
Information settings pr
ovide information including an event log, software and equipment serial numbers, and usage information.
To view the information settings:
1. Press Pause.
2. To enter the password, press the keys in the following sequence: 6, 5
3. Scroll through the informational settings.
For detailed information on these settings, see the Operator's Guide on the pr
oduct page at www.precor.com.
Program the Receiver (8R/9R Option)
Use automatic programming (AP) mode rst to acquire the facility's available channels.
IMPORTANT
T
ransmitters must not share the same channel. If they do, the automatic programming feature will not be able to accurately apply the correct channels to the receiver.
To auto program the receiver:
1. Press the Channel Up
and Mute k
eys simultaneously for three seconds.
2. When AP appears on the display, release the keys.
3. Use the Channel
and keys to locate the appropriate frequency selection.
4. Press Mute to select the frequency selection. The receiver starts the automatic programming, scanning for the active transmitter channels and storing them in memory.
When nished, the receiver returns to normal operation and the rst available channel appears on the display.
For more information on how to program the receiver, see the Operators Guide on the product page of the Precor website at www.precor.com.
For complete console operating instructions and troubleshooting, visit us at www.precor.com.
Make sure your trainers regularly read our blog (select languages) at www.precor.com for more ideas about tness routines and advice from trusted
industry experts.
The P31 Console offers a streamlined design with an advanced LED display, basic electronic readouts, and a mobile device charger.
To Next Page
Need help?
General
