Precor Precision & Energy Series - Using the Treadmill Safety Clip

Precision Series / Energy Series Treadmill Owner's Manual: TRM 445 / 243 12
Using the Treadmill Safety Clip
The treadmill is equipped with two different stop
functions, which behave as follows:
If the user … Then the
treadmill
belt …
And the console …
Pulls on the
lanyard
attached to the
safety clip and
removes the
stop key
Slows to a
stop
Shows the words "Please
Replace the Stop Key."
Presses down
on the red STOP
switch
Slows to a
stop
Shows that the exercise
workout is paused. Pressing
the button again ends the
workout and displays the
workout summary. Pressing it
a third time returns the user to
the home screen.
The following figure shows the location of the STOP
switch and the stop key.
Figure 4: STOP switch, stop key, and safety clip