Precor Precision & Energy Series - Obtaining Service; Required Tools; Hardware Kit (Not to Scale)

Getting Started
3
Obtaining Service
Do not service the treadmill except for minor belt adjustments and maintenance
tasks as described in the owner’s manual. For more information regarding
customer support numbers or a list of Precor authorized service dealers, visit the
Precor web site at www.precor.com.
Required Tools
 17 mm open-end wrench
 Level
Hardware Kit (not to scale)
The hardware kit shipped with this equipment contains the fasteners and other
hardware components shown in the following table. Before you begin assembly,
make sure that your hardware kit is complete. If not, please contact Precor
Customer Support.
Figure 1: Hardware kit
Table 1. Hardware kit contents
Number Fasteners
Quantity
Socket head cap screw
(⁵₁₆-inch x ³₄-inch)
8
Flat washer (#10) 6
Buttonhead cap screw
(⁵₁₆-inch x ³₄-inch)
6
Buttonhead cap screw
(¹₄-inch x ¹₂-inch)
7
Socket head cap screw
(#10 x ¹₂-inch)
6
Split washer
(⁵₁₆-inch)
6
⁵₃₂-inch hex wrench 1
³₁₆-inch hex wrench 1
¹₄-inch hex wrench with longer leg 1