Chapter 4
Maintenance
You will need to perform the following tasks each day to
maintain the equipment and keep it operating smoothly:
Clean any upholstery on the equipment.
Inspect pads for wear.
Clean and inspect frames.
Check warning and instructional labels.
Check that all fasteners are properly secured.
Clean and Inspect Pads
To remove surface dirt and perspiration, clean upholstery
daily with a mild soap and water solution in a spray bottle.
Spray upholstered surfaces lightly and wipe dry with a clean
cloth.
Important: To clean the upholstery, do not use cleaning products
that have any of these ingredients: solvents, alcohol, ammonia, or
petroleum. Use a mild detergent-based cleaner instead.
Inspect pads for cracks in the upholstery, broken and loose
stitching, loose staples, and loose mounting bolts. Replace
pads as needed (refer to Obtaining Service to purchase new
pads).
Important: Do not reupholster pads or use pads not approved by
Precor.
To Next Page
Loading...
Need help?
General
