Pregis SHARP MAX PRO 18 - Roller Cleaning; Drive & Platen Rollers Cleaning; Pinch Roller Cleaning

MAX PRO 18
©
Operator Manual Original Printed in English
CLEANING
3-12
DRIVE & PLATEN ROLLERS
Regular cleaning of the Drive & Platen Rollers will
keep the Sharp MAX™ PRO 18 running at optimum
performance.
1. Remove power and air from bagger.
2. Release the Cradle Latch.
3. Moisten a lint-free cloth with Isopropyl Alcohol and
rub back and forth along Drive Roller.
4. Rotate roller and repeat until roller is clean.
5. Repeat for Platen Roller.
6. When rollers are clean, close the Cradle Latch.
7. Return power and air to bagger.
PINCH ROLLER
After Cleaning the Drive Roller, clean the Pinch Roller
in the Cradle Latch Assembly.
1. Open the Cradle Latch.
2. Pinch Roller is behind Front Air Knife Cover but
can be accessed from below cover when Cradle is
opened.
3. Moisten a lint-free cloth with Isopropyl Alcohol and
rub back and forth on the Pinch Roller.
4. Rotate roller and repeat until roller is clean.
5. When roller is clean, close the Cradle Latch.
SECTION 3 - SET-UP & OPERATION