Prescitech X12 - Device Settings and Configuration; Admin Password and Settings Management

17
1. To change the admin password
2. Save/Reload your Extender setting
Setting
1) Launch a web browser.
2) Enter http://extenderlogin.com
or http://192.168.19.252/ in the address field of the
browser login screen displays.
3) Enter the admin password you set. The BASIC Home
screen displays.
4) Select “Setting ->System Tools -> Admin Account”
5) Type your current password and new password twice.
6) Click the Save button, Your changes are saved.
You can use this feature to save your extender’s setting
and reload it easy when you reset the router to factory
setting or update the router firmware.
1) Launch a web browser.
2) Enter http://extenderlogin.com
or http://192.168.19.252/ in the address field of the
browser login screen displays.
3) Enter the admin password you set. The BASIC Home
screen displays. “Setting ->System Tools -> Backup &
Restore”
4) Click the Backup button to save the current setting
and click browse and upload to reload the saved setting.