01
Preparing
Below setup guide just for EXTENDER Mode. If you
need setup by AP mode, please refer to User Manual.
More details about troubleshoots please go to User
Manual.
1) Confirm your router works.
Web-Browser Method
1) Place your extender in the same room as your WiFi
router.
2) Use your Smart-Phone to connect with the extender
(find "Prescitech X12_2.4G or Prescitech X12_5G"
and connect with it, if password request try PIN number
of the rear panel.)
3) Visit http://extenderlogin.com/ or the IP address
192.168.19.252 from a web browser.
4) Log-in to setup the password for the Admin Page.
5) Select the SSID (network name) you like to extend.
2) Switch the side button of extender into “ON” & “Ex-
tender”
3) Plug the extender into an electrical outlet.
Quick Installation Guide
To Next Page
Loading...