1.
Launch ProTools.
2.
Got to Setup | Hardware and select your Studio 24c
from the Peripherals list. Click OK.
3.
Go to Setup | Playback Engine and select your Studio 24c
from the menu at the top of the window. Click OK.
1.推出支持工具。
2.安装|硬件，从外围设备列表中选择你的Studio 24c。单击OK。
3.
进入设置
|
播放引擎，从窗口顶部的菜单中选择你的
Studio 24c
。单击
OK
。
1.
Launch Sonar.
2.
Go to Options | Audio... and click on the Advanced tab.
3.
Change the Driver Mode to“ASIO.”
4.
Click the “OK”button.
5.
Restart Sonar.
6.
Go to Options | Audio... and click on the Drivers tab.
7.
Highlight all input and output drivers beginning
with your Studio-series product name.
8.
Go to Options | Audio... and click on the General tab.
9.
Set the PlaybackTiming Master to“Studio 24c ... DAW Out 1.”
10.
Set the RecordingTiming Master to“Studio 24c ... DAWOut 2.”
1.声纳发射。
2.转到选项|音频…然后点击高级选项卡。
3.将驱动模式改为 “ASIO”。
4.点击“确定”按钮。
5.重启声纳。
6.转到选项|音频…然后点击Drivers选项卡。
7.突出显示所有以 studio 系列产品名称开头的输入和输出驱动程序。
8.转到选项|音频…然后单击“常规”选项卡。
9.设置回放计时大师 “Studio 24c…DAW OUT 1。”
10.设置录音计时大师为 “Studio 24c…”DAW OUT2。”
To Next Page
Loading...
