Prevue Hendryx Penthouse Suites User Manual

Penthouse Suites
Decorative Bird Cage & Stand—Assembly Instructions
Model #261
Included Parts:
1 Ea—Wire Cage Front Panel/Right Side Panel Section
1 Ea—Wire Cage Back Panel/Left Side Panel Section
1 Ea—Wire Stand Shelf
1 Ea—Wire Pull Out Grill 1 Ea—Base Tray
2 Ea—Perches 1 Ea—Cage Base
1 Ea—Wire Cage Roof 4 Ea—Plastic Stand Clips
2 Ea—Cups with Hoods 4 Ea—Wire Stand Legs
Prevue Pet Products, Inc. www.prevuepet.com Email: customerservice@prevuepet.com
Step #1: Assemble Cage Stand & Base
• Snap Plastic Stand Clips into place on each of the 4
Wire Stand Legs. Squeeze legs tightly together before
snapping clips into position for a tight “snap” fit.
• Place plastic cage base upside-down onto a table .
• Snap 4 wire stand legs into bottom of Plastic Cage
Base. Place metal plate of stand leg under snap lip of
base (closest to center of base), then use your finger to
slightly pull back the plastic tab on the outside corner
of the base bottom (labeled “Release”). Cage leg will
snap into place. See Illustration #1 & #2
Illustration #1 Illustration #2

Prevue Hendryx Penthouse Suites Specifications

General

Brand	Prevue Hendryx
Model	Penthouse Suites
Category	Pet Care Product
Language	English

Summary

Decorative Bird Cage & Stand Assembly Instructions

Included Parts

List of all components included in the bird cage package.

Assemble Cage Stand & Base

Step-by-step guide to assembling the bird cage stand and base.

Assemble Cage (Separately from Cage & Stand Unit)

Instructions for assembling the main wire cage body sections.

Assemble Cage Accessories

Guidance on installing perches, cups, and other cage accessories.