To Next PageTo Next Page
Need help?Do you have a question about the Prevue Hendryx Silverado Cage and is the answer not in the manual?
General| Brand | Prevue Hendryx |
|---|---|
| Model | Silverado Cage |
| Category | Pet Care Product |
| Language | English |
Follow assembly steps and contact customer service for help if needed.
Lists included and optional tools for cage assembly, such as allen wrench, screwdriver, and mallet.
Highlights the need for a second person and instructs to check all components against the hardware list.
Advice on cage positioning, importance of toys for bird health, and rotation.
Suggestions for accessories to promote health and the need for travel carriers.
Contact information for Prevue Pet Products, including phone, website, and email.
Defines component labels and provides notes on interchangeable parts.
Lists and identifies all hardware and tools provided with the cage for assembly.
Align and attach lower front and right side panels using long screws.
Install casters by hand or with a mallet, then upright the cage.
Attach upper back panels to lower back panel and upper front panel to lower front panel.
Slide upper side panels into frame channels and secure with wires.
Attach top and side roof panels using long screws, ensuring proper alignment.
Install front door, perch, cups, floor grille, and debris tray into designated locations.
Pre-assemble seed guard sections and attach them to the cage using remaining screw/nut pairs.
Ensure all screws are tightened for a safe and stable cage assembly.
