5...
6...
7. . .
8...
9...
10...
FRIEND ME!
4601— 10/17—USL.1 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800] 243-3624 • customerservice @ prevuepet.com
For successful assembly of your MODEL #4601 Duplex Rabbit Hutch
Follow this bunny trail
LEVEL = GOOD!
NOT LEVEL = NOT GOOD
READTHESEINSTRUCTIONS!
If you’ve never followed instructions before, this is a good time to start!
These tips have been compiled to lead you to a successful assembly. We know
you can do this!
If you still run into trouble, you can call our Prevue Customer Service line
at 1 (312) 243-3624.
FINDALEVELSURFACE
Build your hutch on a flat surface and, with a friend, carry it to the location
where it will be used. Assembling the hutch on the flattest surface available
will help you greatly when squaring up panels and aligning the roof panels.
FINDAFRIEND (orGOIT ALONE—both are OK)
If you follow these steps, hutch assembly will be easy for one person. But you may
find a second person’s assistance useful in some steps.
If you have to move the assembled hutch to its final location, you will most certainly
need assistance to protect the integrity of the structure.
COUNT CONTENTS OFHARDWARE PACKETS
After unpacking all components, count the contents of the screw packets.
Compare the counts against the Parts List on the next page. There should be
at least one spare for each packet. If any packets are short, please contact
Prevue or use your own appropriate-size replacements.
READ!
READ!
READ!
1
2
3
4
EASY AS 1-2-3 !
To Next Page
Need help?
General
