× 4
4601— 10/17—USL.6 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800] 243-3624 • customerservice @ prevuepet.com
1
...continued
2
Assemble the HUTCH
COMPONENTS. You will
need these pieces:
× 8
The front panels feature pre-installed wood dowels
to help position the panels correctly for the hutch
floor tray.
Align the dowels with the pre-drilled companion holes
and insert, pressing the panels together.
From the frame exterior, attach the side panels to
the front panels with [P1] screws, using the pre-drilled
starter holes as guides.
RUNWAY RAMP
Place the runway ramp
in position and attach it
to the side panel with
[P4] screws.
Cutaway view
To Next Page
Loading...
