13
Colt Series www.pridemobility.com
II. SAFETY
OUTDOOR DRIVING SURFACES
Your scooter is designed to provide optimum stability under normal driving conditions—dry, level sur-
faces composed of concrete, blacktop or tarmac. However, Pride recognizes that there will be times when
you will encounter other surface types. For this reason, your scooter is designed to perform admirably on
packed soil, grass and gravel. Feel free to use your scooter safely on lawns and in park areas.
Avoid driving on uneven terrain and/or soft surfaces.
Avoid tall grass that can become tangled in the running gear.
Avoid loosely packed gravel and sand.
Do not use your scooter in fresh or salt water.
Do not use your scooter at the edge of a steam, lake or ocean.
If you feel unsure about a driving surface, avoid that surface.
PUBLIC STREETS AND ROADWAYS
WARNING! Exercise extreme caution when operating the scooter on footpaths, pave-
ments, bridleways, pedestrian areas and roads. Obey all local pedestrian traffic rules.
STATIONARY OBSTACLES (STEPS, KERBS, ETC.)
WARNING! Do not drive near raised surfaces, unprotected ledges and/or drop-offs (kerbs,
porches, stairs, etc.).
WARNING! Do not attempt to have your scooter climb or descend an obstacle that is
inordinately high.
WARNING! Do not attempt to have your scooter proceed backward down any step, kerb
or other obstacle. This may cause the scooter to tip.
WARNING! Be sure your scooter is traveling perpendicular to any kerb you may be
required to ascend or descend. See figures 3 and 3A.
WARNING! Even though your scooter may be capable of handling greater obstacles, Pride
recommends that you do not attempt to negotiate a curb that has a height greater than
2 in. (5 cm). Doing so could cause instability in your scooter.
Figure 3. Correct Kerb Approach
Figure 3A. Incorrect Kerb Approach
To Next Page
Loading...
