EasyManua.ls Logo

Pride Mobility Colt Series - Page 46

Pride Mobility Colt Series
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
Colt Series www.pridemobility.com
APPENDIX I - SPECIFICATIONS
COLT DELUXE
Model Number SC710DX
Obstacle Climbing Ability 5 cm (2 in.)
Overall Length
2
119.38 cm (47 in.)
Overall Width
2
56.21 cm (22.13 in.)
Total Weight Without Batteries
2,6
68 kg (150 lbs.)
Heaviest Piece When Disassembled Front section: 29.48 kg (65 lbs.)
Turning Radius
2
133.35 cm (52.5 in.)
Speed (Maximum)
1
10 km/h (6.25 mph)
Range Per Charge
1,4
Up to 39.18 km (20.74 miles)
Ground Clearance
2
8.25 cm (3.25 in.)
Weight Capacity 181 kg/28 stone (400 lbs.)
Standard Seating Type: Viscount Jr.
Weight: 19.05 kg (42 lbs.)
Material: Black Vinyl
Dimensions: 44.45 cm (17.5 in.) overall width
43.18 cm (17 in.) effective depth
Drive System Rear-wheel drive, sealed transaxle, 24-volt DC motor
Dual Braking System Regenerative and electromechanical
Tyres 25.4 cm (10 in.) solid
Battery Requirements
3, 5
Two 12-volt, deep-cycle
Size: U1 (31–36 Ah) or optional 40 Ah
U1 Battery Weight: 11 kg (24.5 lbs.) each
40 Ah Battery Weight: 14.74 kg (32.5 lbs.) each
Battery Charger 5-amp, off-board
1
Varies with user weight, terrain type, battery amp-hour (Ah), battery charge, battery condition and tire condition. This specification can be
subject to a variance of (+ or -) 10%.
2
Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of (+ or – ) 3 %.
3
AGM or Gel-Cell type required. See V. “Batteries and Charging.”
4
Tested in accordance with ASNI/RESNA, WC Vol 2, Section 4 & ISO 7176-4 standards. Results derived from theoretical calculation based
on battery specifications and drive system performance. Test conducted at maximum weight capacity.
5
Battery weight may vary based on manufacturer.
6
Includes standard seat
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176
series EN12184 standards. All specifications subject to change without notice.

Table of Contents

Related product manuals