Pride J6 with NE Electronics - Page 23

Table 1. J6 with NE Electronics Error Codes
LCD DISPLAY DIAGNOSIS SOLUTION
Power Section Error Cycle power. Check power module (2)
and NE joystick module (1) connections
and wiring. See Section 3.
Joystick Out of Center Release joystick and make sure the joy-
stick is in the center position. Power off
and on again. Check connections.
See Sec-
tion 3
.
Communication Error
Check joystick module cable connec-
tions. See Section 3.
Motor/Brake Error Check motor/brake connectors. See Sec-
tion 3.
Low Battery Voltage Charge batteries. See Section 3.
High Battery Voltage
Disconnect charger. Contact Quantum
Technical Service for further trouble-
shooting.
Drive Thermal Warning
Allow motors to cool. Contact Quantum
Technical Service for further trouble-
shooting.
Open Motor Error Check motor connectors. See Section 3.
Low Battery
Charge batteries. See Section 3 .
Battery Charging or Drive
Inhibit
Unplug charger when charging is
com-
plete. Check connections. See Section 3 .