PRIMA p. 07
MOVABLE SPOT WELDER
This machine complies with the 89/392/CEE directives and subsequent modifications and
supplements.
PACKING
The spot welder is packed in a sturdy cardboard box.
When shipped in a container by sea, the spot welder is sealed with salt resistant plastic
material.
On request, the spot welder is delivered on a pallet with wooden case and fastened with
steel strips.
UNPACKING
Remove the panels of the wooden case (if provided).
Remove the steel strips.
Remove the protective plastic material.
Remove the cardboard box.
CAUTION: The packing materials – wood, nails, plastics, cardboard etc. – must not be left
within the reach of children, as they could be a source of danger.
The packing materials must be subdivided and disposed of in compliance with the
applicable Codes.
STORAGE
The spot welder must be stored at a temperature between 0 and 40 °C in a dry place,
protected from weather and far from heat sources.
The spot welder must be moved with care, avoiding shocks and dropping which could
damage the machine.
To Next Page
Loading...