PrimaLuceLab EAGLE3 - First use: installing EAGLE on the telescope

PrimaLuceLab iSrl EAGLE3 User Manual
First use: turn off EAGLE
When you want to turn off EAGLE, first disconnect your remote control device. From the START screen, select the "options
off" and then press "Disconnect" (picture 16).
This way you can close the remote connection of your device. You can then exit the "Microsoft Remote Desktop". Then
press the power button (7 - picture 17). Take a look at the LED at the right of the 4 USB 2.0 ports: when the central SSD
LED and the right ACT one will be off, the EAGLE will be off and you can disconnect the power supply.!
"
page !18
Image 17: push the ON / Off button (7) to switch EAGLE off.
Image 16: Select “Disconnect” to terminate session