CAUTION 1
Components Identification 3
First use: power 4
First use: switch on and activation of wireless network 5
First use: Setting the wireless control device 9
First use: backup your SSD drive before installing your software 12
First use: install your software 17
First use: turn off EAGLE 18
First use: installing EAGLE on the telescope 19
First use: power other instruments connecting to the EAGLE 22
First use: remotely control devices with EAGLE Manager 24
-!connect or disconnect every power out port of EAGLE 26
-!set power out tension of the 3 power out ports with adjustable tension 27
-!connect or disconnect connection to devices connected to the 4 USB 2.0 ports 28
-!check for power in tension and battery lifetime 28
-!set WiFi connectivity 29
-
remotely turn on/off the entire telescope 31
Advanced use: program connection and power to devices 33
Advanced use: remotely turn on EAGLE with wired connection 34
Controlling the telescope remotely with Cartes du Ciel 38
Autoguiding with PHD2 Guiding 45
Drift Alignment using PHD Guiding 50
Q & A 58
To Next Page
Loading...