91
6B Maintenance/ Cleaning
Eddie is made of stainless steel to facilitate easy cleaning. Each of the part has its own cleaning schedule
and procedure. Refer to the following subsections for more information.
What to use: All stainless-steel parts can be hand-cleaned on the Printer with mild detergent
such as Dawn™ dishwashing soap or any automatic dishwasher soap. Other parts noted below
can be cleaned with water.
6B1 The Carousel Platter
This can be removed from the Printer in fully submerged in water to clean or cleaned in a
dishwasher.
Cleaning Frequency: Clean Daily
To Next Page
Loading...
