12 Getting Started
6. Once the slides are in place, straighten any that did not
properly fall in the cartridge and ensure the printable
surface is facing up and near the front of the cartridge as
it is placed in the printer.
7. Close the lid and insert the cartridge into the printer. Push
near the bottom of the cartridge until you hear a click.
Click!
Important Note! The blue LED
light will turn on when both the
slide cartridge and ribbon are
correctly installed.
Important Note!
To prevent
feeding problems, a). fan the slides
with your latex glove protected fin-
ger and b.) never touch the slide
surface without latex gloves!
Printable Surface
To Next Page
Loading...
Need help?
General
