36
THE DISPLAY IS LIGHTING WHEN A PROGRAMME
IS SELECTED, BUT NO CHARACTERS OR DIGITS
ARE SHOWN
No characters or digits are shown on the dis-
play when a locked programme is selected.
To unlock a programme, see Changing set-
tings.
WRONG LANGUAGE DISPLAYED
If the display language has changed for some
reason you can go back to the original langua-
ge.
The languages you can choose between are
Dansk, Deutsch, English, Espanol, Français,
Italiano, Nederlands, Norsk, Portugués, Suomi
and Svenska.
To change language do as follows:
Switch off the power switch, then switch it on
again so that the machine is in start-up mode.
Press the
8
button five times, then press
the
1
button five times. You have to comple-
te these ten button presses within fifteen se-
conds.
Within three seconds of pressing the
1
but-
ton for the fifth time you should then select the
language you want by pressing the
6
or
7
buttons.
TUMBLE DRYER TROUBLESHOOTING
To Next Page
Loading...
