Print-Rite PR-855 - 2.2 Installing Chain Paper

9
 Usage of wax paper
Please install the wax paper according to Fig. 2-3.
2.2 Installing Chain Paper
1)
Check the position of release lever, adjust the lever to the front (chain paper icon position)as
Fig. 2-4.
Fig. 2-4
2)
As shown in Fig. 2-5, place the perforated paper to be printed behind the printer. The height
of the paper should be lower than the printer.
Fig. 2-5
3)
Adjust the position of adjustment lever according to the thickness of paper before feeding as
Fig. 2-6. The adjustment method is shown in this Chapter 2-4.
Fig. 2-6