23
Valid: Printer will reject paper automatically when power on.
Invalid: Printer will not reject paper automatically when power on.
12) Enhance printing
For pin power,
Valid: Printer switches to enhance printing mode, it fits for multi-layer paper.
Invalid: Printer default mode.
13) Pin power(single paper)
The pin power is as below when adjust lever is below 3.
Min 1 Max 4
14) Pin power(multi-layer paper)
The pin power is as below when adjust lever is 3 and above 3.
Min 1 Max 4
15) Pin power(enhance)
The pin power is as below when adjust lever is above 3.
Min 1 Max 3
4.2.3 Emulation parameter settings
Fig. 4-3 Emulation parameter settings
Functions Default settings Optional settings
1 Paper size A4
2.5in 2.75in 3in 3.5in 11/3in 4in
4.5in 5in 5.5in 6in 7in 8in 11in
B5 A4 14in 12in customize
2
Page head
(flat-bed)
2/12in
0in 1/12in 2/12in 3/12in 4/12in
5/12in 6/12in 7/12in 8/12in 9/12in
10/12in 11/12in 12/12in 13/12in
customize
3
Page head (chain
paper)
2/12in
0in 1/12in 2/12in 3/12in 4/12in
5/12in 6/12in 7/12in 8/12in 9/12in
10/12in 11/12in 12/12in 13/12in
customize
4
Printing mode
settings
Invalid Valid
5 Page length Valid Invalid
To Next Page
Loading...