Print-Rite PR-855 - 4.2 Parameter Description; 4.2.1 Longitudinal calibration parameter settings; 4.2.2 System parameter settings

To Next Page

To Previous Page

4.2 Parameter Description

4.2.1 Longitudinal calibration parameter settings

Table. 4-1 Longitudinal calibration parameter settings

Function Default settings Optional settings

1 LQ -1 Min-8 Max8

2 HS -1 Min-8 Max8

3 Draft -1 Min-8 Max8

Note:

Printer will print a new line when you press [LOAD/UNLOAD] and [TEAR OFF] to increase

or decrease set values. Each line includes function name, set value and several“|”, adjust

“|” in a line and then press [ONLINE] to save settings, meanwhile it will go to next

parameter settings automatically.

4.2.2 System parameter settings

Table. 4-2 System parameter settings

Function Default settings Optional settings

1 Emulation mode ESC/P OKI

2 Paper tearing type Long Short

3 Auto paper tearing Valid Invalid

4 Image print direction Bi-D Uni-D

5 Paper-out direction

(flat-bed feeding)

Front out Rear out

6 Delay detection (flat-bed

feeding)

1sec 0.5sec 1.5sec 2sec

7 Silent printing Automatic Invalid Valid

8 Broken pin number 0 1-24

9 Compress printing Invalid Valid

10 Form printing Valid Invalid

11 Reject paper automatically

when power on

Valid Invalid