What does 'E NET TEST UNAVAILABLE' mean on my Printronix Printer and how to fix it?
If your Printronix Printer displays 'E NET TEST UNAVAILABLE', cycle the power. Wait for 'E Net Ready' to display, then retry the operation. If the fault message appears again, contact your authorized service representative.
How to troubleshoot 'SHUTTLE JAM' on a Printronix Printer?
To troubleshoot a 'SHUTTLE JAM' on your Printronix Printer, check for any obstructions to the shuttle, a twisted ribbon, or a platen lever closed too tightly. If the fault source is not apparent, contact your authorized service representative.
What does 'HMR BANK FAN FLT' mean on my Printronix Printer and how do I fix it?
If your Printronix Printer displays 'HMR BANK FAN FLT', check for obstruction of vents and fan airway and remove any obstructions. Also, check for items beneath the printer blocking cabinet vents. Power cycle the printer. If this message recurs, contact your authorized service representative.
What to do if my Printronix Printer says 'PAPER JAM TIMEOUT'?
If your Printronix Printer displays a 'PAPER JAM TIMEOUT' message, clear the paper jam and then reload the paper.
How to fix 'SHUTTLE STALL' on Printronix Printer?
To address a 'SHUTTLE STALL' on your Printronix Printer, set the platen lever to match the thickness of the paper, but not too tightly. Check and adjust the platen gap. Inspect the ribbon mask for deformation that snags and interferes with shuttle movement. If the fault source is not apparent, contact your authorized service representative.
Why does my Printronix Printer say 'POWER SUPPLY HOT'?
If your Printronix Printer displays 'POWER SUPPLY HOT', check the printer's environment. If it is hot or dusty, relocate the printer. If this occurs frequently, contact your authorized service representative.
What does 'PLATEN OPEN TIMEOUT' mean on my Printronix Printer and how to fix it?
If your Printronix Printer displays a 'PLATEN OPEN TIMEOUT' message, close the platen lever.
What does 'CLOSE PLATEN' mean on my Printronix Printer and how to solve it?
If your Printronix Printer displays 'CLOSE PLATEN', you should close the platen lever.
How to resolve 'BUFFER OVERRUN' error on a Printronix Printer?
To resolve a 'BUFFER OVERRUN' error on your Printronix Printer, check the printer's serial port configuration setup. Ensure that the baud rate and data protocol match both the host and printer settings.
What to do if my Printronix Printer displays 'LOAD PAPER'?
If your Printronix Printer displays the message 'LOAD PAPER', you should load paper into the printer.
General| Print Technology | Line Matrix |
|---|---|
| Resolution | 180 x 144 dpi |
| Print Width | 13.6 inches |
| Weight | 145 lbs |
| Connectivity | Parallel, Serial, Ethernet, USB |
| Paper Handling | Continuous form |
| Noise Level | 55 dBA |
To Next Page
