Overview
14
KC Markings
DANGER
POTENTIAL FOR EXPLOSION
z Verify that the power, input and output (I/O) wiring are in accordance with Class
I, Division 2 wiring methods.
z Substitution of any component may impair suitability for Class I, Division 2.
z Do not connect or disconnect equipment unless power has been switched off or
the area is known to be non-hazardous.
z Securely lock externally connected units and each interface before turning on
the power supply.
z Do not use, connect, or disconnect USB cable unless area is known to be non-
hazardous.
z Do not disconnect while circuit is live or unless the area is known to be free of
ignitable concentrations.
z Potential electrostatic charging hazard: wipe the front panel of the terminal with
a damp cloth before turning ON.
Failure to follow these instructions will result in death or serious injury.
₆G㫛G⼚G
G
h G₆₆G
O㠛ⶊ㣿G㏷䐋㔶₆㧦㨂PG
G
G
㧊G ₆₆⓪G 㠛ⶊ㣿Oh PG 㩚㧦䕢㩗䞿₆₆⪲㍲G 䕦ⰺ㧦G ⡦⓪G ㌂㣿㧦⓪G
㧊G㩦㦚G㭒㦮䞮㔲₆G⧒ⳆSGṖ㩫㣎㦮G㰖㡃㠦㍲G㌂㣿䞮⓪Gộ㦚G⳿㩗
㦒⪲G䞿┞┺UG
G
G
To Next Page
Loading...
