Pro-face PL-6930-T41 - Page 33

PL-6930 / PL-7930 Series User Manual
2-8
 Expansion Slot
The following power current is the total output current when using all slots
<PL-6930(4 SLOT type)>
SLOT No. Available Bus
Available Board Size
Standard Use When using PL-FC210
SLOT1 ISA
163mm [6.42in.]x122mm [4.80in.](corresponding to Half size
only)
SLOT2 PCI
250mm[9.84in.]×122mm
[4.80in.]
(corresponding to 3Q size)
340mm [13.39in.] x 122mm
[4.80in.]
(corresponding to Full size)
SLOT3 PCI or ISA
SLOT4 PCI or ISA
Output
Voltage
DC5V DC12V DC3.3V
*1
*1 Only PCI SLOT supports this output voltage.
DC-5V
*2
*2 Only ISA SLOT supports this output voltage.
DC-12V
Current
Consumption
4.0A 1.0A 1.5A 0.1A 0.1A
<PL-6931(2 SLOT type)>
SLOT No. Available Bus
Available Board Size
Standard Use When using PL-FC210
SLOT1 ISA
163mm [6.42in.]x122mm [4.80in.](corresponding to Half size
only)
SLOT2 PCI or ISA
250mm[9.84in.]×122mm
[4.80in.]
(corresponding to 3Q size)
340mm [13.39in.] x 122mm
[4.80in.]
(corresponding to Full size)
Output
Voltage
DC5V DC12V DC3.3V
*1
DC-5V
*2
DC-12V
Current
Consumption
2.0A 0.5A 0.5A 0.1A 0.1A
• Be sure to use the PCI/ISA board concerning of the heat goes up during operation.