15
HOW TO MOVE THE ELLIPTICAL
Due to the size and weight of the elliptical, moving
it requires two persons. Stand in front of the ellipti-
cal, hold the upright, and place one foot against one of
the front wheels. Pull on the upright and have a second
person lift the rear stabilizer until the elliptical will roll
on the wheels. Carefully move the elliptical to the
desired location, and then lower it to the floor.
HOW TO LEVEL THE ELLIPTICAL
If the elliptical rocks
slightly on your floor
during use, turn one
or both of the level-
ing feet beneath the
rear stabilizer until
the rocking motion
is eliminated.
HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the elliptical has been exposed to
cold temperatures, allow it to warm to room tem-
perature before you plug in the power adapter. If
you do not do this, you may damage the console
displays or other electronic components.
Plug the power
adapter into the
receptacle on the
frame of the elliptical.
Insert the appropriate
plug adapter into the
power adapter if nec-
essary. Then, plug
the power adapter
into an appropriate
outlet that is properly
installed in accor-
dance with all local codes and ordinances.
Upright
Wheel
Lift here
Place your
foot here
Leveling Feet
HOW TO USE THE ELLIPTICAL
To Next Page
Loading...
Need help?
General
