To Next PageTo Next PageWhy do the pedals slip on my Pro-Form ENDURANCE 320 E Elliptical Trainer?
If the pedals slip while you are pedaling, even when the resistance is at its highest, the drive belt may need adjustment. To fix this, locate and loosen the M6 x 20mm Screw. Then, tighten the M10 x 55mm Screw until the Drive Belt is tight, and retighten the M6 x 20mm Screw.
How to fix squeaky rollers on my Pro-Form ENDURANCE 320 E Elliptical Trainer?
If the rollers on your elliptical are squeaking when moving on the track, apply a small amount of the included PTFE grease to a paper towel and wipe off any excess grease.
Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference.
Regular maintenance ensures optimal performance and reduces wear. Inspect and tighten all parts regularly.
Most console issues stem from low batteries. Check heart rate monitor function if needed.
Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference.
Regular maintenance ensures optimal performance and reduces wear. Inspect and tighten all parts regularly.
Most console issues stem from low batteries. Check heart rate monitor function if needed.
General| Brand | Pro-Form |
|---|---|
| Model | ENDURANCE 320 E |
| Category | Elliptical Trainer |
| Language | English |
