EasyManua.ls Logo

Pro-Form 520 Zlt Treadmill - User Manual

Pro-Form 520 Zlt Treadmill
28 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER’S MANUAL
www.iconeurope.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
QUESTIONS?
If you have questions, or if there are
missing parts, please contact us:
UNITED KINGDOM
Call: 08457 089 009
From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: csuk@iconeurope.com
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC
Express Way
CASTLEFORD
WF10 5QJ
UNITED KINGDOM
AUSTRALIA
Call: 1800 993 770
E-mail: australiacc@iconfitness.com
Write:
ICON Health & Fitness
PO Box 635
WINSTON HILLS NSW 2153
AUSTRALIA
Model No. PETL59711.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal

Table of Contents

Other manuals for Pro-Form 520 Zlt Treadmill

Preview: Manuel De L'Utilisateur
Manuel De L'Utilisateur28 pages
Preview: Manuale D'Istruzioni
Manuale D'Istruzioni28 pages
Preview: Manual
Manual28 pages
Preview: Bedienungsanleitung
Bedienungsanleitung28 pages
Preview: Instrukcja Obsługi
Instrukcja Obsługi28 pages
Preview: Manual Do Utilizador
Manual Do Utilizador28 pages

Questions and Answers

  • M
    Mr. Daniel BlackJul 30, 2025
    How to fix Pro-Form Treadmill when the power does not turn on?
    • A
      Andrea BanksJul 30, 2025
      First, ensure the power cord of your Pro-Form Treadmill is securely plugged into a properly earthed outlet. If you need an extension cord, use a 3-conductor, 14-gauge (1 mm[2]) cord no longer than 5 ft (1.5 m). Also, after plugging in the power cord, check that the key is fully inserted into the console. If it still doesn't work, examine the power switch on the treadmill frame near the power cord. If the switch protrudes, it has tripped. To reset it, wait five minutes, then press the switch back in.
  • J
    Julie LewisAug 4, 2025
    What to do if Pro-Form 520 Zlt power turns off during use?
    • G
      Gregory JohnsonAug 4, 2025
      If your Pro-Form Treadmill turns off during use, check the power switch. If it has tripped, wait five minutes, then press it back in. Make sure the power cord is properly plugged in; if it is, unplug it, wait five minutes, and plug it back in. Also, try removing and reinserting the key from the console. If these steps don’t resolve the issue, no answer.
  • D
    Diane PotterAug 9, 2025
    Why does the walking belt slip on my Pro-Form Treadmill?
    • J
      Johnny MichaelAug 9, 2025
      If the walking belt on your Pro-Form Treadmill slips when you walk on it, use the hex key to turn both idler roller screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 inches off the walking platform. Then, plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes to test it.
  • P
    Patrick JamesAug 14, 2025
    How to fix Pro-Form 520 Zlt walking belt that slows when walked on?
    • K
      kennethcoleAug 14, 2025
      If the walking belt on your Pro-Form Treadmill slows down when you walk on it, it might be overtightened. Remove the key and unplug the power cord. Use the hex key to turn both idler roller screws counterclockwise, 1/4 of a turn. Your treadmill has a walking belt coated with high-performance lubricant. Never apply silicone spray or other substances to the walking belt or the walking platform unless instructed to do so by an authorized service representative, as these substances may deteriorate the walking belt and cause excessive wear. If you suspect that the walking belt needs more lubricant, no answer.
  • T
    Theresa RobinsonAug 25, 2025
    Why do the console displays stay on after removing the key from my Pro-Form 520 Zlt Treadmill?
    • D
      Doris BryanAug 26, 2025
      If the displays on your Pro-Form Treadmill remain lit when you remove the key, the demo mode is likely turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, no answer.
  • J
    Jessica SmithSep 10, 2025
    How to center the walking belt on a Pro-Form 520 Zlt Treadmill?
    • C
      Charles LuceroSep 12, 2025
      If the walking belt on your Pro-Form Treadmill has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn. If the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn. Then, plug in the power cord, insert the key, and run the treadmill to check the alignment.

Summary

WARNING DECAL PLACEMENT

IMPORTANT PRECAUTIONS

ASSEMBLY

OPERATION AND ADJUSTMENT

HOW TO PLUG IN THE POWER CORD

Guide on connecting the treadmill's power cord to an outlet.

HOW TO TURN ON THE POWER

HOW TO USE THE MANUAL MODE

Instructions for operating the treadmill in manual mode.

HOW TO USE A PRESET WORKOUT

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL

Steps to safely fold the treadmill for storage.

HOW TO MOVE THE TREADMILL

HOW TO LOWER THE TREADMILL FOR USE

TROUBLESHOOTING

EXERCISE GUIDELINES

EXERCISE INTENSITY

WORKOUT GUIDELINES

Pro-Form 520 Zlt Treadmill Specifications

General IconGeneral
Incline0-12%
Speed0-12 mph
FoldableYes
Programs30 Workout Apps
Heart Rate MonitoringEKG Grip Pulse

Related product manuals